Standard
WELDING ELECTRODES, COVERED, STEEL 0.07 - 0.15C
1972-11-01
HISTORICAL
AMS5031B
This specification covers a low-carbon steel in the form of covered welding electrodes.
Search Results
Standard
WELDING ELECTRODES, COVERED, STEEL 0.07 - 0.15C
1977-01-01
HISTORICAL
AMS5031C
This specification covers a low-carbon steel in the form of covered welding electrodes.
Standard
WELDING ELECTRODES, COVERED, STEEL 0.07 - 0.15C
1967-11-01
HISTORICAL
AMS5031A
Standard
WELDING ELECTRODES, COATED, STEEL, CORROSION RESISTANT 12.5Cr
1957-01-01
HISTORICAL
AMS5777
Standard
WELDING ELECTRODES, COATED, STEEL, CORROSION AND MODERATE HEAT RESISTANT 16.5Cr - 4.5Ni - 2.9Mo - 0.1N
1959-01-01
HISTORICAL
AMS5775
Standard
WELDING ELECTRODES, COATED, STEEL, CORROSION AND MODERATE HEAT RESISTANT 15.5Cr - 4.5Ni - 2.9Mo - 0.1N
1957-09-01
HISTORICAL
AMS5781
Standard
WELDING ELECTRODES, COATED, STEEL 5Cr - 0.55Mo
1968-11-01
HISTORICAL
AMS6467A
Standard
WELDING ELECTRODES, COATED, STEEL 5Cr - 0.55Mo
1959-01-15
HISTORICAL
AMS6467
Standard
WELDING ELECTRODES, COATED, STEEL 1.05Mo - 0.2V (0.06 - 0.12C)
1959-06-15
HISTORICAL
AMS6464
Standard
WELDING ELECTRODES, COATED, STEEL 1.05Mo - 0.20V (0.06 - 0.12C)
1967-11-01
HISTORICAL
AMS6464A
Standard
WELDING ELECTRODES, COATED, STEEL 0.07 - 0.15C
1959-06-01
HISTORICAL
AMS5031
Standard
WELDING ELECTRODES, COATED STEEL, CORROSION RESISTANT 16.9Cr - 4.8Ni - 0.2(Cb + Ta) - 3.5Cu
1962-01-01
HISTORICAL
AMS5827
Standard
WELDING ELECTRODES, COATED STEEL, CORROSION RESISTANT 16.4Cr - 4.8Ni - 0.22 (Cb + Ta) - 3.6Cu
1967-04-01
HISTORICAL
AMS5827A
Standard
Viscosity Test of Thickened Aircraft Deicing/Anti-icing Fluids
2015-10-23
CURRENT
AIR9968B
This SAE AIR provides a description of a reference method for viscosity tests of thickened (AMS 1428) anti-icing fluids.
Standard
Vertical Dynamic Balancing Systems – Isolating Repeatability Issues in Challenging Applications
2021-05-26
WIP
ARP8911
This new Aerospace Recommended Practice will serve as a practical resource that offers guidance to both the machine operator and Process Engineer for isolating the source(s) of non-repeatability in measured unbalance data. The content of this standard addresses: • Vertical Dynamic Machine Capability to achieve the specified unbalance tolerances and repeat within those tolerances • Tooling Capability to repeat within the specified unbalance tolerances • Rotor characteristics that may preclude repeating within the required unbalance tolerances.
Standard
Verification & Validation of Integrated Vehicle Health Management Systems
2014-11-05
WIP
ARP6887
The ARP shall cover the objectives and activities of Verification & Vallidation Processes required to assure high quality and/or criticality level of an IVHM Systems and Software.
Standard
Vehicle, Magnetic Particle Inspection Petroleum Base
2020-10-09
CURRENT
AMS2641D
This specification covers two types of refined hydrocarbon compounds in the form of liquids. This specification only covers newly manufactured materials.
Standard
Vehicle OBD II Compliance Test Cases for J1979-2
2019-08-23
WIP
J1699-5
The main purpose is to verify that vehicles are capable of communicating a minimum subset of information, in accordance with the diagnostic test services specified in SAE J1979-2: E/E Diagnostic Test Modes
Standard
Vehicle OBD II Compliance Test Cases
2021-04-28
CURRENT
J1699/3_202104
The main purpose of this SAE Recommended Practice is to verify that vehicles are capable of communicating a minimum subset of information in accordance with the diagnostic test services specified in SAE J1979, or the equivalent document ISO 15031-5. Any software meeting these specifications will utilize the vehicle interface that is defined in SAE J2534. SAE J1699-3 tests shall be run using an SAE J2534-1 (API Version 04.04) Interface. However, the use of an SAE J2534-2 (API Version 04.04) Interface shall be permitted if the following conditions are met: The number of 29-bit ISO 15765 OBD ECUs exceeds the capability of the SAE J2534-1 Interface. The SAE J2534-2 Interface meets or exceeds all of the SAE J2534-1 requirements and also supports the SAE J2534-2 feature “Mixed Format Frames on a CAN Network.”
Standard
Vehicle OBD II Compliance Test Cases
2021-05-04
WIP
J1699/3
The main purpose of this SAE Recommended Practice is to verify that vehicles are capable of communicating a minimum subset of information in accordance with the diagnostic test services specified in SAE J1979, or the equivalent document ISO 15031-5. Any software meeting these specifications will utilize the vehicle interface that is defined in SAE J2534. SAE J1699-3 tests shall be run using an SAE J2534-1 (API Version 04.04) Interface. However, the use of an SAE J2534-2 (API Version 04.04) Interface shall be permitted if the following conditions are met: The number of 29-bit ISO 15765 OBD ECUs exceeds the capability of the SAE J2534-1 Interface. The SAE J2534-2 Interface meets or exceeds all of the SAE J2534-1 requirements and also supports the SAE J2534 2 feature “Mixed Format Frames on a CAN Network.”
